Accessories

1421000 Ceiling Trim Kit

Allows for the bracket pole to be run through the ceiling material and fixed to a suitable structure above the ceiling line, and provides for a neat trim cover of the cut hole, held in place securely by grommet screws. Please specify colour required.

1422000 Extra Long Spider Arms

For those large commercial projectors where the mounting holes are spread too far for the standard spider arms - Standard Arm reach is 140mm from centrepoint (280mm Diameter), with the extra long arms having 220mm from centrepoint (440mm Diameter) reach capacity. Please specify colour required.

1423000 Cut-Down Collar

This bracket system is designed to be able to be cut down to the required pole length on-site, and then the system simply screws back together after the pole has been trimmed. But if you are not able to perform a neat right-angle cut on-site, you can utilise the deeper cut-down collar which will cover unsightly cutting and square up the pole in relation to the backplate. Please specify colour required.

1424000 Top Ball Joint Assembly

Got a sloping cathedral ceiling, well use this top ball joint to fit to the ceiling (up to 30 degrees adjustment) and adjust the pole and bracket to the appropriate vertical plane. Please specify colour required.

1425000 Vertical Surface Mount Bracket

This bracket can be used with the standard bracket or the top ball joint assembly to fix to a vertical plane, such as an overhead beam. Please specify colour required.

Note: Various top base plates are available, please seek advice from sales department.